SfBusyIndicator not showing on android

[Rikard Schouwstra]

With the simple getting started example, it works perfectly on iOS but does not show on Android. I am using Xamarin.Forms 2.5.0.121934

[Mugundhan Saravanan]

Hi Rikard Schouwstra,

Thanks for contacting syncfusion support.

We have checked the reported issue using the same package that you used but we could not reproduce the reported issue. please find the sample for your reference from the following link

Sample: http://www.syncfusion.com/downloads/support/directtrac/general/ze/SfBusySample-1998922169  

  

Please let us know, if you have any other concern. 

Regards,
Mugundhan S.   

[Antonio]

With the simple getting started example, it works perfectly on iOS but does not show on Android. I am using Xamarin.Forms 2.5.0.121934

Hello Rikard, 

I had a similar problem even before using sfBusyIndicator, with a contentview I had created to work as sfBusyIndicator.

The difference I noticed is that if you do it with a ContentPage, it works for both iOS and Android, while with a ContentView, it only works for iOS.

If you're in the same situation, you can solve as I did.

My problem was that having positioned sfBusyIndicator (as well as my contentview before) on a grid, I realized that the Frame (declared "below") that contains the rest of the objects covered the sfBusyIndicator.

So, just for Android, before doing IsBusy = True, I make invisible the main content of my contentview (for me it's a Frame) and then at IsBusy = False, I make it visible again.

So I solved and now I use sfBusyIndicator without problems (fantastic and light !).

[Mugundhan Saravanan]

Hi Antonio,

Thanks for the solution that you have achieved for your scenario. We are glad that you have achieved your requirement using SfBusyIndicator. Please let us know if you need any further assistance.

Regards,
Mugundhan S.

[Antonio]

Hi Antonio,

Thanks for the solution that you have achieved for your scenario. We are glad that you have achieved your requirement using SfBusyIndicator. Please let us know if you need any further assistance.

Regards,
Mugundhan S.

Thanks, 

at this point I would like to ask you whether there is the possibility of increasing the lines of the message or if I set a high fontsize, I can have the automatic reduction to avoid that the text, if long, is not completely visible on the line.

[Mugundhan Saravanan]

Hi Antonio,

Thanks for your update.

We have attached a screenshot. Can you please review and confirm that same issue are reproduced in your side.

Screenshot: http://www.syncfusion.com/downloads/support/directtrac/general/ze/Scrrenshot-2063187196 

Please let us know whether the Text not getting wrapped is the issue you have mentioned so that can log defect report and help you achieving your requirement.

Regards,
Mugundhan S. 

[Antonio]

Perfect Mugundhan!

It is the same as my situation, for now I have proceeded by shortening the message, but if we could "lengthen" the message, on certain occasions it would not be bad.

Thanks for the excellent assistance.

Hello !

[Mugundhan Saravanan]

Hi Antonio,

Thanks for your update.

We have confirmed the issue logged bug report for the ” Header should wrap in SfBusyindicator”. 

This fix will be included our upcoming Volume2 sp-1 release which will be rolled out by the end of June 2018.

Regards,
Mugundhan S. 

[Antonio]

Great  !

I confirm my excellent impressions for your products and the fantastic assistance !

Thanks Mugundhan, bye ! (Ciao !)

Antonio.

[Mugundhan Saravanan]

Hi Antonio,

You are most welcome. Please get back to us if you need any other assistance and we will be happy to help you.

Regards,
Mugundhan S.

[Paul Anderson S]

Hi Antonio. 

 

On further analysis with the SfBusyIndicator implementation currently we don’t have wrap support for the Header content in all the three platforms. Hence, we considered this as a feature request and the support will be available in our upcoming Volume 3 main release which will be by the end of September 2018. 

 

Regards, 

Paul Anderson 

[Paul Anderson S]

Hi Antonio, 

  

Sorry for the inconvenience caused. 

  

Due to some stability and priority features we have not implemented the Header Text wrap support in our Volume 3 2018 release. We will implement this in our Volume 4 release which will be in the end of December 2018. 

  

Regards, 

Paul Anderson