Strange behavior sometimes occurs when selecting multiple columns and performing auto-fill.

[crosslife]

I cannot reproduce this issue in an empty project at the moment, but it consistently occurs in my project.

see the attachment.

Attachment: 20241129161227_WindowShot_f5fc1a0c.zip

[Manikanda Akash Munisamy]

Hi crosslife,

We have reviewed the reported scenario along with the attached video reference. Based on the details provided, we understand that you are encountering irregularities while performing the Fill Series operation in the SfSpreadsheet. However, we were unable to reproduce the issue in a simple sample on our end. We have attached the simple sample and screen recording for your reference.

To assist you further, we kindly request the following additional details:

1. Have you implemented any specific customizations in your sample? If yes, please share those details with us.
2. If possible, please modify the attached sample to replicate the issue so that we can analyze it on our end.

If we have misunderstood your request or if your requirements differ, please provide additional details. This will help us better understand the issue and offer a more accurate solution.

Thank you for your understanding and cooperation.

Regards,

Manikanda Akash

Attachment: SfSpreadSheet_Net6_0_7cbab383.zip

[crosslife]

I have reproduced the issue in an empty project this time, including video and sample project.

Attachment: 20241203153533_WindowShot_c5c26376.zip

[crosslife]

sample project.

Attachment: SyncfusionDemo_e006dce7.zip

[Manikanda Akash Munisamy]

Hi crosslife,

We have checked the reported issue "Numbers are filled with empty cells while performing a copy series operation when two cells selected" as a defect. We have logged a bug, and it will be fixed in our Essential Studio 2024 Volume 4 Main Release.

You can track the status of this report through the following feedback link,
Feedback Link: Numbers are filled with empty cells while performing a copy series operation when two cells selected in WPF | Feedback Portal

Note: The provided feedback link is private, and you need to log in to view this feedback.

We will let you know once it is released. We appreciate your patience until then.

Disclaimer: Inclusion of this solution in the weekly release may change due to other factors including but not limited to QA checks and works reprioritization.

Regards,

Manikanda Akash

[crosslife]

This issue title seems different from what was shown in the video I provided above. In the video, after selecting multiple columns and filling them, clicking on the empty columns beside them causes some values to appear unexpectedly.

[Manikanda Akash Munisamy]

Hi crosslife,

We apologize for the inconvenience caused. We have attached the wrong feedback in our previous update. Kindly track the status of this report through the following feedback link,
 

Feedback Link: Unexpected Behavior When Selecting Multiple Cells and Applying Fill Series with Frozen Rows/Columns in WPF | Feedback Portal

Note: The provided feedback link is private, and you need to log in to view this feedback.

We will let you know once it is released. We appreciate your patience until then.

Disclaimer: Inclusion of this solution in the weekly release may change due to other factors including but not limited to QA checks and works reprioritization.

Regards,

Manikanda Akash

[Malini Selvarasu]

Hi crosslife,

We are glad to announce that our Essential Studio® 2024 Volume 4 Main Release V28.1.33 is rolled out with the fix for the issue "Unexpected Behavior When Selecting Multiple Cells and Applying Fill Series with Frozen Rows/Columns" and is available for download under the following link.

https://www.syncfusion.com/forums/195512/essential-studio-2024-volume-4-main-release-v28-1-33-is-available-for-download

We thank you for your support and appreciate your patience in waiting for this release. Please get in touch with us if you would require any further assistance.

Root Cause Details:
Recently, we made some changes to resolve the issue where the copy cells and fill series operations were not working as expected when performed within hidden rows. However, these changes affected the existing behavior of the copy cells and fill series operations. As a result, we reverted the changes related to hidden rows to restore the original functionality. Now, the issue has been resolved, and everything is working properly.

Regards,
Malini Selvarasu