1. Home
  2. Forum
  3. WinForms
  4. Autogenerate row naming

Autogenerate row naming

hi Good day.

I want to generate a unique naming for my datas as shown in the "Serial" column.(please see the attached file)

the whole idea is that, I want to compare the values for columns Item,D2,D3, & D4. 
perfect example at rows 1-2 where all the same values. so the "Code" column is called A.
and rows 3 & 4 where values in D2,D3 and D4 were different. I call it B and C.

The same situation for rows 5 & 6 and the rest.

thank you



Attachment: Sample_be376d90.7z

19 Replies
VS Vijayarasan Sivanandham Syncfusion Team November 26, 2020 03:36 PM UTC

Hi Mark Jayvee,

Thank you for contacting Syncfusion support.

Currently, we are analyzing your requirement of “Autogenerate row naming in SfDataGrid”. We will validate and update you the details on or before November 30, 2020. 
 
We appreciate your patience until then. 
 
Regards, 
Vijayarasan S




VS Vijayarasan Sivanandham Syncfusion Team November 30, 2020 03:33 PM UTC

Hi Mark Jayvee,

Sorry for the inconvenience caused.

We are currently working on your requirement of “Autogenerate row naming in SfDataGrid” but we get some technical issue based on our source architecture and we need two more business days to validate this. We will update you with further details on December 02, 2020.

We appreciate your patience until then. 
 
Regards, 
Vijayarasan S 


VS Vijayarasan Sivanandham Syncfusion Team December 2, 2020 05:01 PM UTC

Hi Mark Jayvee,

Thank you for your Patience.

Based on provided information we have prepared the sample for achieve your requirement. 
We hope this helps. Please let us know, if you require further assistance on this.

Regards,
Vijayarasan S 


MJ Mark Jayvee December 8, 2020 12:26 AM UTC

thank you for the response.

but when I debug and group and expand, I get an Exception Unhandled errror?

Now the table by Item, I noticed that the Code column was giving me A,B,C,D, and E? which is not the case.
Item 1002 compare to Item 1001 both unique so this should give me both A. and again comparing this items(1001, 1002, &1004) this should give another A because all

VS Vijayarasan Sivanandham Syncfusion Team December 8, 2020 03:58 PM UTC

Hi Mark Jayvee,

Thanks for the update.

We could able to reproduce your reported issue “group and expand the unboundColumn get the Exception Unhandled errror in SfDataGrid” from our end. Currently, we are checking the feasibility to fix this issue from our end. We will validate and update you details on December 10, 2020. 
We appreciate your patience until then.

Regards,
Vijayarasan S 


VS Vijayarasan Sivanandham Syncfusion Team December 10, 2020 04:23 PM UTC

Hi Mark Jayvee,

Thank you for your Patience.

Based on provided information we have prepared the sample for achieve your requirement. 
We hope this helps. Please let us know, if you require further assistance on this.

Regards,
Vijayarasan S 



MJ Mark Jayvee December 17, 2020 03:24 AM UTC

Hi thank you for the response.


groupings is now fixed, however the Column "code" is not working as planned.


The main concept is to 1st compare values at D2, next is D3 and next is D4.
Kindly see the expected output.

Attachment: Sample1_b3727944.7z

VS Vijayarasan Sivanandham Syncfusion Team December 17, 2020 03:14 PM UTC

Hi Mark Jayvee,

Thanks for the update.

We are little unclear with your scenario. Can you please provide the more information related to your query?

Can you please share us below things?       
        1. Brief replication procedure/video illustration of the reported issue
        2. Could you please provide more details about your scenario with illustrations?         
It will be helpful for us to check on it and provide you the solution at the earliest.

Regards,
Vijayarasan S

 


MJ Mark Jayvee December 18, 2020 02:58 AM UTC

Hi Vijayarasan S,

I have attached a sample. I hope this will help.

please let me know if unclear.

Regards,
mark

Attachment: illustration_ad9dc11c.zip

MA Mohanram Anbukkarasu Syncfusion Team December 18, 2020 01:14 PM UTC

Hi Mark,  
 
Thanks for the update.   
 
We are currently validating this. We will check and update with further details on December 22, 2020. We appreciate your patience until then.   
 
Regards,  
Mohanram A.  


VS Vijayarasan Sivanandham Syncfusion Team December 22, 2020 02:52 PM UTC

Hi Mark Jayvee,

Thank you for your Patience.

Based on provided information we have prepared the sample for achieve your requirement. 
We hope this helps. Please let us know, if you require further assistance on this.

Regards,
Vijayarasan S 


MJ Mark Jayvee January 1, 2021 05:30 AM UTC

Hi Vijayarasan S,

I wish you a very good New Year.

Thank you for the response. I appreciate your effort in providing a workable code.
It is close enough to my example. below is the sample where Column "Code" gave me a letter "A" which is correct.

orders.Add(new OrderInfo { Item = 1002, D2 = "Antonio Moreno", D3 = "Mexico", D4 = "ANATR" });
orders.Add(new OrderInfo { Item = 1007, D2 = "Antonio Moreno", D3 = "Mexico", D4 = "ANATR" });

What I notice is that at Column "D3" where both is "Mexico". I want to change that into "USA", refer to sample below.
at Column "Code", this should give me "A" & "B". kindly see attached.

orders.Add(new OrderInfo { Item = 1002, D2 = "Antonio Moreno", D3 = "Mexico", D4 = "ANATR" });
orders.Add(new OrderInfo { Item = 1007, D2 = "Antonio Moreno", D3 = "USA", D4 = "ANATR" });

Attachment: 12_565e3c6f.7z

VS Vijayarasan Sivanandham Syncfusion Team January 4, 2021 02:20 PM UTC

Hi Mark Jayvee,

Thank you for your Patience.

Based on provided information we have prepared the sample for achieve your requirement. 
We hope this helps. Please let us know, if you require further assistance on this.

Regards,
Vijayarasan S 


MJ Mark Jayvee January 5, 2021 09:19 AM UTC

Hi Vijayarasan S.

Thank you for the response. I noticed the update in the code it is the same method I did before. This works with the first 2 rows.(Antonio Moreno)

Could you please check the attached file and see the rows where there are Thomas Hardy.

I labelled the rows according to the expected Code values. As you can observe the differences and uniqueness in the row values for columns D3 and D4.

thank you,
mark

Attachment: 1_67bb765c.7z

VS Vijayarasan Sivanandham Syncfusion Team January 6, 2021 06:25 PM UTC

Hi Mark Jayvee,

Thanks for the update.

Currently, we are analyzing your requirement of “the differences and uniqueness in the row values for columns D3 and D4.”. We will validate and update you the details on or before January 08, 2021. 
 
We appreciate your patience until then. 
 
Regards, 
Vijayarasan S

MA Mohanram Anbukkarasu Syncfusion Team January 8, 2021 01:05 PM UTC

Hi Mark Jayvee, 

Sorry for the inconvenience caused.  

We are still working on this. We will update with details on January 12, 2021. We appreciate your patience and understanding.  

Regards, 
Mohanram A. 



VS Vijayarasan Sivanandham Syncfusion Team January 12, 2021 05:31 PM UTC

Hi Mark Jayvee,

Thank you for your patience.

Based on provided information we have tried all possible ways to achieve your requirement but still some case not properly show as your provided image. We have provided the solution almost achieve your requirement. There is no other way to achieve your requirement.

Sample Link: https://www.syncfusion.com/downloads/support/forum/160075/ze/CustomizedSample-765398688 
Regards,
Vijayarasan S 


MJ Mark Jayvee January 12, 2021 10:57 PM UTC

hi Vijayarasan,


thank you for the response. 

cheers,
Mark

VS Vijayarasan Sivanandham Syncfusion Team January 13, 2021 02:48 PM UTC

Hi Mark Jayve,

 
Thanks for the update. 
 
Please let us know if you have any further queries on this. We are happy to help you😊. 
 
Regards, 
Vijayarasan S 


Loader.
Up arrow icon