Bug when you set TabSplitter to vertical mode.

Question

Bug when you set TabSplitter to vertical mode it throws exception. Screenshots exAttachment: Screenshots_e978931e.zip

Ethem Acar · Answer

Made a video, you can see how buggy it is in the Visual Studio demo from Syncfusion:https://streamable.com/cexij4

Gokul Thanudhas · Answer

Hi Ethem,We are validating your reported query. We will validate and update you in two business days. We appreciate your patience until then.Regards,Gokul T

Gokul Thanudhas · Answer

Hi Ethem,Sorry for the delay in getting back to you,We have confirmed the
reported scenario is a defect and logged a report for the reported scenario “Tab splitter is not
functioning properly in vertical mode”. We will provide the patch
for the reported issue on 9th May 2022.You can track the status
of this defect using the following feedback link: Tab
splitter is not functioning properly in vertical mode in WPF | Feedback Portal
(syncfusion.com)If you have any more
specification replication procedures or a scenario to be tested, you can add it
as a comment in the portal.Please let us know if you
need any further assistance.Regards,Gokul T

Gokul Thanudhas · Answer

Hi Ethem,Sorry for the inconvenience caused.

Currently, we are working with high priority for the reported issue. We will provide the fix for the issue in the patch version on 12th May 2022. We appreciate your patience until then.Regards,Gokul T

Gokul Thanudhas · Answer

Hi Ethem,We have fixed the reported issue “Tab
splitter is not functioning properly in vertical mode" from our end. 
This patch can be downloaded from the links
below.

Recommended
  approach - exe will perform automatic configuration.  
  
  Please
  find the patch setup from the location
  below:           
  
  Patch
  link: 
  
  https://syncfusion.com/Installs/support/patch/20.1.0.47/1225558/F174303/SyncfusionPatch_20.1.0.47_1225558_5122022080216128_F174303.exe

Please
  find the patch assemblies alone from the location
  below:            
  
  Assemblies
  Link:  
  https://syncfusion.com/Installs/support/patch/20.1.0.47/1225558/F174303/SyncfusionPatch_20.1.0.47_1225558_5122022080216128_F174303.zip
  NuGet link:  
  
  https://syncfusion.com/Installs/support/patch/20.1.0.47/1225558/F174303/SyncfusionNuget_20.1.0.47_1225558_5122022080216128_F174303.zip

Assembly Version: 20.1.0.47Installation
Directions:           This patch
should replace the files " Syncfusion.Tools.WPF” under the following
folder.           $system
drive:\ Files\Syncfusion\Essential Studio\$Version #
\precompiledassemblies\$Version#\[TargetFramework]    
      Eg :
$system drive:\Program Files\Syncfusion\Essential
Studio\20.1.0.47\precompiledassemblies\20.1.0.47\ 4.6 To
automatically run the Assembly Manager, please check the Run assembly manager
checkbox option while installing the patch. If this option is unchecked, the
patch will replace the assemblies in precompiled assemblies’ folder only. Then,
you must manually copy and paste them to the preferred location, or you must
run the Syncfusion Assembly Manager application (available from the Syncfusion
Dashboard, installed as a shortcut in the Application menu) to re-install
assemblies. https://www.syncfusion.com/support/directtrac/patches  Disclaimer:           Please note
that we have created this patch for version 20.1.0.47 specifically to resolve
the issue reported in this incident. If you have received other patches for the
same version for other products, please apply all patches in the order
received.  Please let us know, if you are using any other Syncfusion
version, we will provide patch in your version. This fix
will be included in our upcoming Volume 2, release which will be available at
June 2022.Please let
us know if you need any further assistance on this. We will be glad to assist
you.Regards,Gokul T.