1. Home
  2. Forum
  3. ASP.NET MVC - EJ 2
  4. DocToPDFConverter change page layout

DocToPDFConverter change page layout

Hi

I am currently working on a method to dynamically fill in data from a Word via merge mails and then a convention and save as PDF.

The part that allows you to fill in the Word and convert it to PDF works fine. However I noticed that the layout between the Word and the PDF changes. As you can see in the attachment, the table in the Word contains crossed out elements, but these are offset in the PDF. Also, the first two tables are offset to the right of the others, whereas in the Word, all the tables are correctly aligned.

Can you tell me where this change comes from and what is the solution to avoid these changes ?


Attachment: Sample_663acae8.zip

9 Replies
LB Lokesh Baskar Syncfusion Team October 5, 2021 04:42 PM UTC

Hi Chaffois,

Thank you for your patience.

Regarding the first two tables cell width is not preserved properly in the converted pdf document.
We are facing some complexities while validating the reported issue “Table column preservation issue occurs while converting Word document to PDF” and we need some time to analyze the behavior to check the feasibility to resolve the reported issue. Currently, we are validating this issue and will update you with more details on 07th October 2021.

Regarding Strikethrough not preserved properly while converting Word document to PDF
We have confirmed that the reported ‘Strikethrough not preserved properly while converting Word document to PDF’ is a defect. We will include the fix for this issue in the weekly NuGet release on 26th October 2021.

The status of this bug report can be tracked through the below link.
https://www.syncfusion.com/feedback/29206/strikethrough-not-preserved-properly-while-converting-word-document-to-pdf

Note: If you are using any other Essential Studio version then kindly let us know the currently installed version, so that we can provide a patch in that version based on our SLA policy.

Please let us know if you have any other queries.

Regards,
Lokesh B



LB Lokesh Baskar Syncfusion Team October 7, 2021 04:08 PM UTC

Hi Chaffois,

Thank you for your patience.

Regarding the first two tables cell width is not preserved properly in the converted pdf document. 
We have confirmed the reported issue “Table Width not calculated properly while converting a DOCX document to PDF” from our side and we have logged a defect report. We will include the fix for this defect in weekly NuGet release which is estimated to be available on 2nd November 2021.

The status of this bug report can be tracked through the below link.
https://www.syncfusion.com/feedback/29304/table-width-not-calculated-properly-while-converting-a-docx-document-to-pdf

Regarding Strikethrough not preserved properly while converting Word document to PDF 
As mentioned earlier we will include the fix for this issue ‘Strikethrough not preserved properly while converting Word document to PDF’ in our weekly NuGet release which is estimated to be available on 26th October 2021.

The status of this bug report can be tracked through the below link.
https://www.syncfusion.com/feedback/29206/strikethrough-not-preserved-properly-while-converting-word-document-to-pdf

Note: If you are using any other Essential Studio version then kindly let us know the currently installed version, so that we can provide a patch in that version based on our SLA policy.

Please let us know if you have any other queries.

Regards,
Lokesh B 


LB Lokesh Baskar Syncfusion Team October 26, 2021 04:11 PM UTC

Hi Chaffois,

Thank you for your patience.

Regarding the first two tables cell width is not preserved properly in the converted pdf document.
As mentioned earlier, we will include the fix for this defect in weekly NuGet release which is estimated to be available on 2nd November 2021.

The status of this bug report can be tracked through the below link.
https://www.syncfusion.com/feedback/29304/table-width-not-calculated-properly-while-converting-a-docx-document-to-pdf

Regarding Strikethrough not preserved properly while converting Word document to PDF
We have included the fix for mentioned “Strikethrough not preserved properly while converting Word document to PDF” in our latest Weekly NuGet (v19.3.0.47). We are glad to announce that our latest Weekly NuGet is now available. You can use that latest NuGet to get resolve this issue at your end.
The status of this task can be tracked through below link:
Note: This fix will be included in our 2021 Volume 3 SP release, which is expected to be available at mid of November 2021 tentatively.
Please let us know if you have any other queries.

Regards,
Lokesh B



LB Lokesh Baskar Syncfusion Team November 2, 2021 07:44 AM UTC

Hi Chaffois, 

Thank you for your patience. 

We are facing some testing failures while resolving the reported issue “Table Width not calculated properly while converting a DOCX document to PDF” at our end. Currently, we are working on this issue, and we have planned to include this fix in our upcoming weekly NuGet release on 16th November 2021.

The status of this bug report can be tracked through the below link. 
Lokesh B 


LB Lokesh Baskar Syncfusion Team November 16, 2021 11:27 AM UTC

Hi Chaffois,

Thank you for your patience.

Due to 2021 volume 3 SP release was rolled out on last week, we have planned the weekly Nuget release on tomorrow (17th  November 2021 ). We will update the details once the weekly NuGet release rollout.

The status of this bug report can be tracked through the below link: 
Lokesh B 


LB Lokesh Baskar Syncfusion Team November 17, 2021 04:23 PM UTC

Hi Chaffois,

Sorry for the inconvenience.

We are facing some testing failures while resolving the reported issue “Table Width not calculated properly while converting a DOCX document to PDF” at our end. Currently, we are working on this issue and we have planned to include the fix in our next Weekly NuGet on 23th November 2021.

The status of the issue can be tracked through below feedback link.
https://www.syncfusion.com/feedback/29304/table-width-not-calculated-properly-while-converting-a-docx-document-to-pdf

Please let us know if you have any other questions.

Regards,
Lokesh B 


LB Lokesh Baskar Syncfusion Team November 23, 2021 02:52 PM UTC

Hi Chaffois,

Thank you for your patience.

We have included the fix for mentioned “Table Width not calculated properly while converting a DOCX document to PDF” in our latest Weekly NuGet (v19.3.0.55). We are glad to announce that our latest Weekly NuGet is now available. You can use that latest NuGet to get resolve this issue at your end.

The status of this task can be tracked through below link:
https://www.syncfusion.com/feedback/29304/table-width-not-calculated-properly-while-converting-a-docx-document-to-pdf

Note: This fix will be included in our 2021 Volume 4 release, which is expected to be available at mid of December, 2021 tentatively.

Please let us know if you have any other questions.

Regards,
Lokesh  B 


LB Lokesh Baskar Syncfusion Team December 20, 2021 07:39 AM UTC

Hi Chaffois,

We are glad to announce that our Essential Studio 2021 Volume 4 Main Release V19.4.0.38 is rolled out and we have included the fix for the reported issue with “Table Width not calculated properly while converting a DOCX document to PDF" in this release.

It is available for download under the following link.
https://www.syncfusion.com/forums/171304/essential-studio-2021-volume-4-main-release-v19-4-0-38-is-available-for-download

The status of this bug task can be tracked through the following link:
https://www.syncfusion.com/feedback/29304/table-width-not-calculated-properly-while-converting-a-docx-document-to-pdf

We thank you for your support and appreciate your patience in waiting for this release. Please get in touch with us if you would require any further assistance.

Regards,
Lokesh B


Loader.
Up arrow icon