Masked Textbox select

Question

Good evening,I have a masked textbox and when I call FocusAsync() the cursor goes to the end of the mask. How could I put the cursor at the begining or select the entire mask to type correctly?Thanks in advance!

Berly Christopher · Answer

Hi Társis, 
  
Greetings from Syncfusion support. 
  
We were able to reproduce the reported issue. We have confirmed the reported issue as a bug at our end and this fix will be included in our weekly patch release scheduled on 7th September 2021. We appreciate your patience until then. 
  
Please track the status of this issue from the below feedback. 
Feedback: https://www.syncfusion.com/feedback/28083/  
  
Regards, 
Berly B.C

Berly Christopher · Answer

Hi Társis, 
  
Thanks for the patience. 
  
We are glad to announce that fix for the issue "Cursor position is set at the end of the input, when FocusAsyn() method is called on initial load" has been rolled out in the weekly patch release 19.2.59. We request you to update the NuGet to latest version to get rid of this issue.  
  
For your convenience, we have prepared the sample and attached it below. 
  
Sample Link: https://www.syncfusion.com/downloads/support/directtrac/general/ze/ICollection_multiselect477066546  
  
Release notes: https://blazor.syncfusion.com/documentation/release-notes/19.2.57?type=all#maskedtextbox  
  
Please let us know if you need any further assistance on this. 
Feedback: https://www.syncfusion.com/feedback/28083  
  
Regards, 
Berly B.C