Detach exception in editor when clearing HidePropertiesCollection

Question

I am trying to switch application to use new 18.4.0.30 version of DLLs, and now I am getting a Detach error when changing value of ComboBox in property grid.

What changes do I need to make for this issue?

See attached demo sln

Attachment: PropertyGrid_Working_f3b98e69.7z

Bharathi Rajakantham · Accepted Answer

Hi Steve,      
         
Thanks for your patience,    
        
The reported issue ”Detach Exception in Editor when clearing the HidePropertiesCollection” has been fixed.       
       
This patch which can be download from the below links.        
         




Recommended approach - exe will perform automatic configuration.         
    
Please find the patch setup from below location:        
      
Patch link :         
     
https://syncfusion.com/Installs/support/patch/18.2.0.44/590137/F162208/SyncfusionPatch_18.2.0.44_590137_3022021075754774_F162208.exe 
     
     
Please find the patch assemblies alone from below location:         
     
Assemblies Link:         
   
https://syncfusion.com/Installs/support/patch/18.2.0.44/590137/F162208/SyncfusionPatch_18.2.0.44_590137_3022021075754774_F162208.zip 
     
     
Nuget link:          
   
https://syncfusion.com/Installs/support/patch/18.2.0.44/590137/F162208/SyncfusionNuget_18.2.0.44_590137_3022021075754774_F162208.zip 
     
     
        
         
Assembly Version: 18.2.0.44 
         
Installation Directions:         
This patch should replace the files "Syncfusion.Tools.WPF” under the following folder.         
$system drive:\ Files\Syncfusion\Essential Studio\$Version # \precompiledassemblies\$Version#\[TargetFramework]         
Eg : $system drive:\Program Files\Syncfusion\Essential Studio\18.2.0.44\precompiledassemblies\18.2.0.44\4.6         
         
To automatically run the Assembly Manager, please check the Run assembly manager checkbox option while installing the patch. If this option is unchecked, the patch will replace the assemblies in precompiled assemblies’ folder only. Then, you must manually copy and paste them to the preferred location or you must run the Syncfusion Assembly Manager application (available from the Syncfusion Dashboard, installed as a shortcut in the Application menu) to re-install assemblies.         
         
https://www.syncfusion.com/support/directtrac/patches         
         
Disclaimer:         
Please note that we have created this patch for version 18.2.0.44 specifically to resolve the issue reported in this incident. If you have received other patches for the same version for other products, please apply all patches in the order received.  Please let us know, if you are using any other Syncfusion version, we will provide patch in your version.      
         
Regards,         
Bharathi R

Bharathi Rajakantham · Answer

Hi Steve, 

Thanks for contacting Syncfusion Support, 

We have checked the reported query “Detach Exception in Editor when clearing the HidePropertiesCollection” from our end. We can able to reproduce the reported issue from our side and we are validating on it. We will update you the further details by 9th Feb 2021. We appreciate your patience until then. 

Regards, 
Bharathi R

Bharathi Rajakantham · Answer

Hi Steve, 
 
Thanks for your Patience, 
We have confirmed the reported issue” Detach Exception in Editor when clearing the HidePropertiesCollection” from our end and logged a bug report on this. The patch for this fix will be estimated to be available on 2nd March 2021. We will provide you the feedback link shortly. We appreciate your patience until then. 
 
Regards, 
Bharathi R

Bharathi Rajakantham · Answer

Hi Steve, 
 
Thanks for your Patience, 
 
You can track the status of the issue using the following feedback link. 
 
Feedback Link: https://www.syncfusion.com/feedback/22246/detach-exception-in-editor-when-clearing-the-hidepropertiescollection 
 
Regards, 
Bharathi R

Steve McWilliams · Answer

I encountered this error while trying to upgrade to 18.4.0.30 version.Can you provide this patch in this version also?Thanks

Bharathi Rajakantham · Answer

Hi Steve, 
 
Thanks for your update. 
 
As requested, we have provided the patch in 18.4.0.30 Version.This patch which can be download from the below links.         
          




Recommended approach - exe will perform automatic configuration.          
     
Please find the patch setup from below location:         
       
Patch link :          
      
https://syncfusion.com/Installs/support/patch/18.4.0.30/590137/F162208/SyncfusionPatch_18.4.0.30_590137_3032021023347394_F162208.exe 
      
      
Please find the patch assemblies alone from below location:          
      
Assemblies Link:          
    
https://syncfusion.com/Installs/support/patch/18.4.0.30/590137/F162208/SyncfusionPatch_18.4.0.30_590137_3032021023347394_F162208.zip 
      
      
Nuget link:           
    
https://syncfusion.com/Installs/support/patch/18.4.0.30/590137/F162208/SyncfusionNuget_18.4.0.30_590137_3032021023347394_F162208.zip 
      
      
         
Please let us know if you need any further assistance on this. We will be glad to assist you. 
 
Regards, 
Bharathi R

Steve McWilliams · Answer

Thanks.That fixed the detach issue

Bharathi Rajakantham · Answer

Hi Chad, 
 
We would be happy that the reported issue is resolved at your end. Please let us know if you have any other concerns. We will be glad to assist you. 
 
Regards, 
Bharathi R