After update from 17.4.0.55 to 18.1.0.48 SfBusyIndicator.IsBusy stoped reacting to false>true change on iOS

[Radoslaw Kubas]

Hello, 

I have simple binding to manage the busy indicator visibility. 

<xForms:SfBusyIndicator AnimationType="Box" IsBusy="{Binding TemporaryState.IsImageAnalyzing, Mode=OneWay}" Title="{i18N:Translate COGNITIVE_ANALYZING}" TitlePlacement="Bottom" TextColor="WhiteSmoke" InputTransparent="True"/>

It works fine in 17.4.0.55 but after update to 18.1.0.48 I noticed that it stops appearing after change from false to true. I tested some scenarios and it seems that if the initial value is true, I can change it to false (and  the busy indicator disappear) but it will never appear again. I noticed the same result with binding and code behind change. For now my solution was to change the logic to 

<xForms:SfBusyIndicator IsBusy="True" IsVisible="{Binding TemporaryState.IsImageAnalyzing, Mode=OneWay}" AnimationType="Box" Title="{i18N:Translate COGNITIVE_ANALYZING}" TitlePlacement="Bottom" TextColor="WhiteSmoke" InputTransparent="True"/>

It works fine, but not so nice solution :) It would be nice to see this regression fixed in coming updates.

Best regards,

Radoslaw Kubas

[Sakthivel Palaniyappan]

Hi Radoslaw,

We are able to reproduce the reported issue and we have fixed the reported issue. Please find the custom assemblies from below location.

Custom Assemblies:
https://www.syncfusion.com/downloads/support/directtrac/general/ze/AS968B~149197269.zip

Assembly version :18.1.0.48

Since 18.1.0.48 is a weekly NuGet release, we are not able to generate patch in 18.1.0.48 version. We can generate patch only for Main release and SP1 release versions, so we have provided the custom assemblies in 18.1.0.48.

Disclaimer:
Please note that we have created this for version 18.1.0.48 specifically to resolve the issue reported in this incident. If you have received other patches for the same version for other products, please apply all patches in the order received.

Fix will be included in our upcoming Volume 1 SP1, 2020 release which will be available on mid of May 2020.We appreciate your patience until then.

Please refer the  below link for how to apply custom assemblies.
https://www.syncfusion.com/kb/8279/how-to-apply-the-custom-assemblies-when-configured-the-project-with-syncfusion-nuget

Please let us know if you have any concern.

Regards,
Sakthivel P. 

[Mugundhan Saravanan]

Hi Radoslaw,

Thanks for your patience.

As we promised, we have included the fix for the reported issue in our Essential Studio 2020 Volume 1 SP release v18.1.0.52 is rolled out and is available for download under the following link.

https://www.syncfusion.com/forums/154238/essential-studio-2020-volume-1-service-pack-release-v18-1-0-52-is-available-for-download  

We thank you for your support and appreciate your patience in waiting for this release. Please get in touch with us if you would require any further assistance.

Regards,
Mugundhan S.